InFocus SP-LAMP-088 - Lamp Module Installation Procedure; Lamp Timer Reset Procedure; Accessing the OSD Menu for Reset; Resetting the Lamp Hour Timer

6) Reverse steps 1 to 5 to install the new lamp module.
While installing, align the lamp module with the connector
and ensure it is level to avoid damage.
Note:
The lamp module must sit securely in place and the lamp
connector must be connected properly before tightening
the screws.
7) To reset the lamp timer: Press the MENU button to open
the OSD menu.
8) Press the ◄► buttons to move to the Settings 2 menu.
Press the ▼ button to move down to Advanced 1 and
press enter.
9) Press the ▼▲ buttons to move down to Lamp Hour
Reset.
10) Press the
(Enter) or ► button. A message screen
appears.
11) Press the ▼▲◄► buttons in sequence to reset the lamp
timer.
12) Press the MENU button to return to Settings 2.