Do you have a question about the inform PDSP 33040 and is the answer not in the manual?
General safety guidelines and warnings for UPS installation and operation.
Critical safety information and handling procedures for UPS batteries.
Explains symbols found on UPS labels for hazard identification.
Specifies electrical standards and connections for UPS installation.
Step-by-step guide for removing the UPS from packaging and moving it.
Detailed steps for making electrical power connections to the UPS.
Steps for connecting the main power input to the UPS.
Procedures for connecting the battery power to the UPS.
Steps for connecting the UPS output to the loads.
Steps to prepare the UPS before initial startup.
Procedures for commissioning and starting up the UPS.
Step-by-step guide to start the UPS with internal batteries.
Step-by-step guide to start the UPS with external batteries.
Steps for commissioning UPS units in a parallel configuration.
Guidelines and frequency for maintaining UPS batteries.
| Frequency | 50/60 Hz |
|---|---|
| Battery Type | Sealed Lead-Acid (SLA) |
| Battery Runtime | 5-10 minutes at full load |
| Efficiency | 90% |
| Operating Temperature | 0°C to 40°C |

