Ingco MG1309 - Technical Specifications; OPERATION INSTRUCTIONS

5|English
Dia. 5
Dia. 6
Technical Specifications
Model No.
MG1309
MG1309M
MG1309-6(ISRAEL Plug)
MG1309-4
MG1309-8(BS Plug)
MG1309S(SAA Plug)
UMG1309 MG1309P
Rated power input
130W
130W
130W
Rated voltage
220-240V~50/60Hz
110-120V~50/60Hz
220-240V~60Hz
No-load speed
10000-32000/min
10000-32000/min
10000-32000/min
Max collet diameter
2.3mm,3.2mm
3/32˝,1/8˝
2.3mm,3.2mm
Level of sound pressure measured
A weighted level LP: 72 dB Sound power level LW: 85 dB Vibration does not exceed: 0.5m/s
2
Rated operating time: ON for 30 mins, OFF for 30 mins.
OPERATION INSTRUCTIONS
Your rotary tool has been designed for Drilling, Cutting, Sanding, Grinding, Routing and
Polishing of Wood, Metal, Plastic and Stone. The tool is designed for light work, such as
engraving, model making, hobby work etc. The tool should not be used for 'heavy' work
otherwise damage may result.
ALW AYS UNPLUG THE TOOL BEFORE FITTING/CHANGING
ACCESSORY OR REPLACING THE COLLET
Dia. 2
collet nut.
lightly tighten the collet
Replacing the collet (See dia 4)
When using an accessory with a smaller or
larger shaft, i.e: drills, you will need to change
the collet as detailed below:
Fitting a cutting/sanding disc.
Dia. 3
Dia. 4
r tighten, otherwise the
disc may crack, see dia 5 & 6.
Fitting an accessory