EasyManua.ls Logo

Ingenico AXIUM DX8000-BASE-W1 - Notes; Delivery and Storage; Power Adapter; Standard

Ingenico AXIUM DX8000-BASE-W1
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
AXIUM DX8000-BASE-W1
07/25
Copyright© 2023 Ingenico –
Banks and Acquirers International Holding SAS
All rights reserved
Prevent the terminal from sun exposure, high temperature, moister and other mean
conditions.
Cut off the power before cleaning the device and wipe the main body with dry cloth.
When the following abnormal phenomena occur, stop running the device immediately,
cut off the power supply, and report to the service provider as soon as possible:
1) Harsh noise heard during operation.
2) Impurities or water found in the machine.
3) Unpleasant smell found during operation.
Deliver the device in normal way, avoiding rain and snow, sun exposure and mechanical impact.
The product should be stored in the original box. The box should be at least 15cm away
from the floor, at least 50cm from the wall, heat source, cold source, window or air inlet.
The base can only be connected to the power adapter which is provided with AXIUM
DX8000-BASE-W1 .
WARNING
The power adapter provided is specially designed for ingenico AXIUM DX8000-BASE-W1.
Do not use any other power supply. The use of a power supply with apparently similar
voltage/current characteristics may damage your terminal.
RF exposure
The antenna of the product, under normal use condition is at least 20cm away from the
body of the user. Warning statement to the user for keeping 20cm separation distance and
the prohibition of operating to a person has been printed on the user manual. So, this
product under normal use is located on electromagnetic far field between the human body.
CE Marking
The CE marking indicates AXIUM DX8000-BASE-
W1 complies with the requirements of
European Directive 2014/53/EU on Radio Equipment for:
The protection of the health and the safety of the user and any other person.
The protection requirements with respect to electromagnetic compatibility.
And complies with harmonized standards.
Operating Frequency Band (RF):
TX Frequency:2412-2472MHz(802.11 b/g/n HT20),2422-2462MHz(802.11 n HT40)
RX Frequency:2412-2472MHz(802.11 b/g/n HT20),2422-2462MHz(802.11 n HT40)
Max. Of Transmit power:
16.66dBm (802.11 b), 15.97dBm (802.11 g), 14.28dBm (802.11 n HT20), 13.75dBm (802.11 n
HT40)
7. Notes
8. Delivery and Storage
9. Power Adapter
10. Standard