Need help?Do you have a question about the Ingenico AXIUM DX8000-BASE-W1 and is the answer not in the manual?
General| Device Compatibility | Ingenico AXIUM DX8000 |
|---|---|
| Connectivity | Wired |
| Input Voltage | 100-240V AC |
| Input Frequency | 50/60Hz |
| Output Voltage | 5V DC |
Lists the items included in the product package based on ordered configuration.
Illustrates and labels the physical components and ports of the device.
Details the signals and pinouts for the device's RJ45, USB-A, USB-B, and RJ22 interfaces.
Provides technical specifications including ports, power output, size, and weight.
Specifies the operating, storage, and delivery conditions for temperature, humidity, and pressure.
Describes the primary functions of the base, including charging and acting as communication ports.
Step-by-step guide to connecting the DX8000 terminal to the base station's WiFi network.
Instructions for accessing and configuring the base station settings via a web browser.
Procedure to reset the base station to its original factory default settings.
Pre-pairing requirements and indicator light meanings for establishing a connection.
Detailed steps for pairing the DX8000 terminal with the base station.
Instructions on how to disconnect a paired DX8000 terminal from the base station.
Guide to configuring WAN and LAN network parameters for Ethernet connectivity.
Instructions for setting up and configuring the 2.4GHz WLAN parameters.
Configuration options for operating mode, DMZ, and static DHCP settings.
Description of different base operating modes: Gateway/Router, Bridge, and WiFi Repeater.
Procedures for updating firmware, saving/loading settings, and managing passwords.
To Next Page