SN Light Condition Base Status
4
1 Red light on Base to be paired
2 Green light flashing Base paired but disconnected with DX8000
3 Green light on Base paired and connected with DX8000
Red light flashing Base in upgrading
4.2 Pair method
First, connect DX8000 to the base via chapter 3.1 and choose “Pair base”. [step1]
After pairing, we can check the Ports and Version of base from DX8000 [Step2].
4.3 Unpair method
Step1 Step2
is to be paired with another DX8000, long press on the [Pairing] button to clear the
pairing record . When the red indicator light is on, pair another DX8000 with the base.
Illumination of two color indicator lights：
Only the paired DX8000 could be unpaired with the base. When DX8000 unpairs the
base, the base will change its conditions to“unpaired” with the red light on.
Click the blue button besides the SSID [Step1]. Click “YES” [Step2] to unpair the base
with DX8000:
9
AXIUM DX8000-BASE-W1
07/25
Copyright© 2023 Ingenico –
Banks and Acquirers International Holding SAS
All rights reserved
To Next Page
Loading...