Ingersol Rand Trane YSC072E M Series User Manual

SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing
of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and
training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags,
stickers, and labels that are attached to the equipment.
Heat Exchanger Replacement
For a Shorter Heat Exchanger Replacement
Installation
Instructions
PART-SVN114A-EN
December 2015
Models
Y*C072A**(L/X) YSC072E**(M/Y) YSC(090/092)A**(L/X)
YSC072E**(L/X) Y*C072A**(H/Z) YSC(090/092)A**(M/Y)
Y*C072A**(M/Y) YSC072E**(H/Z) YSC(090/09 2)A**(H/Z)

Ingersol Rand Trane YSC072E M Series Specifications

General

Brand	Ingersol Rand
Model	Trane YSC072E M Series
Category	Air Conditioner
Language	English

Summary

Introduction and Safety

Safety Advisories and Definitions

Explains the meaning of WARNING, CAUTION, and NOTICE advisories for safe operation.

Electrical Safety and Grounding

Stresses need for qualified personnel and code compliance for field wiring safety.

Personal Protective Equipment (PPE)

Outlines essential PPE for handling electrical, mechanical, and chemical hazards.

Hazardous Voltage and Gas Precautions

Details critical safety measures to prevent electrocution and explosion from gas/power.

General Information and Tools

Model Number Identification

Explains how model numbers identify specific unit types, components, and options.

Required Tools and Materials

Lists all tools and materials needed for the heat exchanger replacement procedure.

Heat Exchanger Replacement Procedure

Hazardous Gas and Vapor Safety

Warns about risks from hazardous gases and flammable vapors during the replacement.

Step-by-Step Replacement Guide

Provides detailed instructions for removing the old and installing the new heat exchanger.

Parts for Heat Exchanger Replacement

A table listing specific parts required for different models during replacement.

Sealing and Reassembly Instructions

Covers sealing the new heat exchanger, reassembly, and belt alignment.