To Next PageTo Next Page
Need help?Do you have a question about the Ingersoll-Rand 1211MAX Series and is the answer not in the manual?
General| Model | 1211MAX Series |
|---|---|
| Drive Size | 1/2 inch |
| Working Pressure | 90 PSI |
| Air Inlet | 1/4 inch NPT |
| Minimum Hose Size | 3/8 inch |
Crucial safety directive to retain and follow the provided instructions for safe operation.
Description of the product's intended application and additional information sources.
Alert regarding sound and vibration measurements and potential user exposure variations.
Component for filtering air supply to the tool.
Device to control air pressure supplied to the tool.
Applies lubricant to the air stream for tool maintenance.
Safety device to stop air supply in emergencies.
Specifies the required diameter of the air hose.
Indicates the thread size for connections.
Connector for attaching the air hose to the tool.
Protective device installed upstream of the hose.
Lubricant type recommended for the tool.
Lubrication point for drive bushing between housing and yoke.
Lubrication procedure for internal ratchet head components.
Lubrication point for the impact mechanism via grease fitting.
