Ingersoll-Rand 1720B series User Manual (English)

Other manuals for Ingersoll-Rand 1720B series

Questions and Answers:

S
Sandra CollinsAug 11, 2025
Why is my Ingersoll-Rand 1720B Power Tool losing power?
- J
  John HuberAug 11, 2025
  Your Ingersoll-Rand Power Tool might be losing power due to several reasons. The air screen or exhaust silencer could be dirty, which can be resolved by cleaning them with a suitable cleaning solution. Alternatively, worn or broken vanes might be the cause, requiring a replacement of the complete set of vanes. Also, check for worn or broken cylinders or scored end plates, replacing them if necessary. Dirty motor parts can also cause low power. To fix this, disassemble the tool and clean it with a suitable solution, then reassemble and lubricate it by injecting 3 cc of the recommended oil into the inlet. Finally, ensure the reverse valve is fully engaged to the left or right.
M
Michael Mosley MDAug 21, 2025
What to do if my Ingersoll-Rand 1720B Power Tool motor will not run?
- T
  Tara MyersAug 21, 2025
  If your Ingersoll-Rand Power Tool motor isn't running, it could be due to incorrect assembly. Disassemble the motor, replace any worn or broken parts, and reassemble it according to instructions. Another possible cause is insufficient lubricant in the impact mechanism. To resolve this, remove the Hammer Case Assembly and lubricate the impact mechanism.
M
Miss Catherine LopezAug 30, 2025
Why won't my Ingersoll-Rand 1720B Power Tool impact?
- Z
  Zachary MooreAug 31, 2025
  If your Ingersoll-Rand Power Tool isn't impacting, it could be due to broken or worn parts in the impact mechanism. Remove the Hammer Case Assembly and examine the impact mechanism parts, replacing any that are worn or broken.