REVIEW COPY 9-7-99
Form MHD56162
PARTS, OPERATION, AND MAINTENANCE MANUAL
for
MANIPULATOR ARM
MODELS
700C 713 720
(Dwg. MHP1568)
Form MHD56162
Edition 1
September 1999
71341481
©
1999 Ingersoll-Rand Company
READ THIS MANUAL BEFORE USING THESE PRODUCTS. This manual
contains important safety, installation, and maintenance information. Make
this manual available to all persons responsible for the installation,
operation and maintenance of these products.
This equipment is intended for industrial use only and should not be used for lifting,
supporting, or transporting people or lifting or supporting loads over people.
Always operate, inspect and maintain this unit in accordance with applicable safety
codes and regulations.
To Next Page
General
