A
Autumn BarberAug 11, 2025
What to do if my Ingersoll-Rand Tools have loss of power?
- Bbenjamin60Aug 11, 2025
If your Ingersoll-Rand Tools experience a loss of power, the cause may be a worn valve. The suggested solution is to replace the valve.
To Next PageTo Next PageWhat to do if my Ingersoll-Rand Tools have loss of power?
If your Ingersoll-Rand Tools experience a loss of power, the cause may be a worn valve. The suggested solution is to replace the valve.
Why is my Ingersoll-Rand Tools operating sluggishly?
If your Ingersoll-Rand Tools are operating sluggishly, it could be due to dirt or oil gum accumulation on internal parts. To resolve this, pour about 3 cc of a clean, suitable cleaning solution into the air inlet and operate for 30 seconds. After flushing, pour about 3 cc of oil into the air inlet and operate the tool for 5 seconds to coat the internal parts with oil.
How to fix loss of efficiency in Ingersoll-Rand Tools?
If your Ingersoll-Rand Tools are experiencing a loss of efficiency, it may be due to a worn piston and/or accessory. The suggested solution is to replace the piston and/or accessory.
General| Model | D Series |
|---|---|
| Air Pressure Requirement | 90 psi |
| Drive Size | 1/2 inch |
| Impacts Per Minute | 1200 |
| Free Speed | 8000 rpm |
| Air Inlet | 1/4 in. |
| Type | Impact Wrench |
| Air Inlet Size | 1/4 in. |
