Ingersoll-Rand MVA017B/VSM-5842 User Manual

Ingersoll-Rand MVA017B/VSM-5842

8 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

45586039

Edition 1

February 2008

Save These Instructions

Air or Gas Motor (Reversible)

MVA017B/VSM-5842

Operation and Maintenance

Information

Table of Contents

Questions and Answers:

R
Raven RobinsonAug 4, 2025
How to troubleshoot low power in Ingersoll-Rand Engine?
- J
  Justin WyattAug 4, 2025
  If your Ingersoll-Rand Engine has low power or low free speed, first check the air pressure at the inlet. To ensure top performance and durability, the air pressure should be 150 psig (10.3 bar /1030 kPa) at the inlet. Also, inspect the vanes for wear or breakage and replace them if needed. Finally, ensure proper lubrication as instructed. If the issue persists, flush the motor as instructed under maintenance.
A
amandagrossAug 13, 2025
What to do if Ingersoll-Rand Engine has rough operation?
- S
  Shannon PhillipsAug 13, 2025
  If your Ingersoll-Rand Engine is operating roughly, examine the rotor bearings for wear or breakage. Replace any bearings that are worn or broken.
K
karlwilsonAug 23, 2025
Why is there scoring of end plates and/or cylinder in my Ingersoll-Rand Engine?
- D
  dennismaddenAug 23, 2025
  If the end plates and/or cylinder of your Ingersoll-Rand Engine are scoring, it indicates that the rotor doesn't have proper clearance. In this case, the motor must be refurbished.

Ingersoll-Rand MVA017B/VSM-5842 Specifications

General

Manufacturer	Ingersoll-Rand
Starter Type	Electric
Engine Model	VSM-5842
Type	Diesel
Power Output	17 HP

Summary

Product Safety Information - When Placing the Product in Service

Product Safety Information - When Using the Product

Installation and Operation

Air Supply and Connections

Details on air supply requirements, filters, hoses, and fittings for optimal motor performance.

Maintenance

Gas Operation Test Procedure

Procedure to test gas motors for leaks after assembly, ensuring proper sealing.

Disassembly

Steps for safely disassembling the motor, emphasizing minimal disruption and part protection.

Assembly

Guidelines for reassembling the motor, including lubrication and bearing installation.

Related product manuals

Preview: Ingersoll-Rand MRV009

Ingersoll-Rand MRV009

Ingersoll-Rand 4IRQ2N

Ingersoll-Rand ARO AF064 Series

Ingersoll-Rand HP750WCU

Ingersoll-Rand 3IRH2N

Ingersoll-Rand 4IRH8N

Ingersoll-Rand 4IRI8N

Ingersoll-Rand 4IRI8T

Ingersoll-Rand 3IRL2N