To Next PageTo Next Page
Need help?Do you have a question about the Ingersoll-Rand P-130 SD and is the answer not in the manual?
General| Brand | Ingersoll-Rand |
|---|---|
| Model | P-130 SD |
| Category | Compressor |
| Language | English |
Numbered safety precautions for operator awareness and machine use.
Safety measures for operation, including parking, towing, and compressed air.
Warning against using volatile liquids like Ether for starting the machine.
Steps to prepare the unit before starting, including leveling and checks.
Step-by-step guide for safely starting the engine and unit.
Instructions for safely shutting down the compressor unit.
Selection of appropriate lubricants based on ambient temperature.
Details on specific MIL-L-46152 and MIL-L-23699B lubricant requirements.
Details on when and how often to change compressor oil.
Specific recommendations for compressor lubricating oil types.
Detailed steps for replacing the oil filter element correctly.
Procedure for draining sediment and condensation from the fuel tank.
Procedures for maintaining the battery and ensuring safety.
Important safety warning regarding air pressure limits during filter cleaning.
Routine maintenance for the fuel tank, including filling and draining.
Instructions for changing and servicing the compressor oil filter.
Critical safety instruction to disconnect battery cables before service.
Detailed step-by-step guide for adjusting the regulator.
Critical safety warning regarding the maximum allowable idle pressure.
Steps to diagnose and fix problems with low air discharge capacity.
Steps to diagnose and fix compressor overheating issues.
Steps to diagnose and fix oil carry over and vibration problems.
Steps to diagnose and fix issues with the engine failing to start.
Diagnosing low air capacity and slow engine speed.
Diagnosing premature unit shutdown and vibration problems.
Diagnosing low engine speed and oil-related issues.
Diagnosing safety valve and engine starting problems.
Diagnosing compressor overheating and oil leaks.
Diagnosing low air discharge and slow engine speed.
Diagnosing oil leaks, unit shutdown, and starting problems.
Exploded view illustration of the regulation system.
List of part numbers for the regulation system, including valves and hoses.
Schematic diagram of the compressor's electrical system.
