Need help?Do you have a question about the Ingersoll-Rand R110IU-10 and is the answer not in the manual?
General| Model | R110IU-10 |
|---|---|
| Type | Rotary Screw Compressor |
| Power | 110 kW |
| Pressure | 10 bar |
| Voltage | 400V |
| Phase | 3 |
| Operating Pressure | 10 bar |
Lists and describes specific trip and warning fault codes and icons.
Diagnoses power, status, and operational indication faults.
Addresses faults related to high compressor temperature.
Resolves motor overload and overpressure shutdown faults.
Diagnoses issues with pressure build-up and compressor loading.
Addresses loading, capacity, and pressure blowdown faults.
Resolves coolant consumption and rapid cycling faults.
Addresses motor rotation, E-stop, and ambient temperature faults.
Diagnoses safety valve and high sump pressure faults.
Addresses sensor failures, calibration, and PTC trip faults.
Diagnoses inlet valve issues and low sump pressure faults.
Addresses filter change and communication failure warnings.
Provides detailed explanations of trip fault conditions.
Provides detailed explanations of warning fault conditions.
Lists and describes parameters configurable in the setup display.
Details trip codes T1 through T20 and their associated icons.
Details warning codes W5 through W19 and their associated icons.
To Next Page