Need help?Do you have a question about the Ingersoll-Rand R90IU-100 and is the answer not in the manual?
General| Type | Rotary Screw |
|---|---|
| Power | 100 hp |
| Voltage | 460 V |
| Phase | 3 |
| Cooling Method | Air Cooled |
Describes LED indicators and fault codes for trip conditions.
Diagnoses power, control voltage, and circuit interruption faults.
Addresses faults related to high compressor temperature and insufficient cooling.
Guides on resolving motor overload and overpressure shutdown faults.
Troubleshoots problems with rated pressure build-up and compressor loading.
Addresses issues with delivering rated capacity and excessive coolant consumption.
Troubleshoots safety valve issues and motor reverse rotation.
Guides on low ambient temperature and high sump air pressure faults.
Addresses failures and calibration issues with pressure and temperature sensors.
Outlines maintenance intervals based on runtime or clock time and indicators.
Provides a detailed schedule of maintenance tasks by period.
Lists trip faults, their causes, and relevant system conditions.
Lists warning faults and their associated conditions.
Lists parameters for status screens like pressure, hours, and maintenance.
Details parameters for setup such as pressure, timers, and units.
Details advanced parameters for calibration, timers, and control modes.
To Next Page