Need help?Do you have a question about the Ingeteam Ingerev City and is the answer not in the manual?
Defines the INGEREV electric vehicle charging stations covered by this manual.
Specifies that the document is intended for qualified personnel only.
Explains the various symbols used in the manual for emphasis and warnings.
Lists the different models of the INGEREV range, including Ground and Duo versions.
Details optional accessories like underground support, anti-tipping, and bottom trim elements.
Covers regulatory compliance, EMC, protection class, contamination class, and power sockets.
Outlines general safety warnings and requirements for personnel and operations.
Lists obligatory safety standards applicable in different countries.
Specifies the use of Category III-1000 Volt instruments for voltage checks.
Details the minimum safety equipment required for working on the unit.
Instructs to keep the unit in its packaging until immediately before installation.
Explains the importance of the serial number for communication with Ingeteam.
Provides steps to follow if the unit is damaged during transport.
Details important points for storing the unit to avoid damage.
Provides guidelines for transporting the unit using pallet trucks and forklifts.
Outlines requirements for moving the unit without packaging.
Emphasizes the importance of correct handling during unpacking to prevent damage.
Specifies requirements for the installation location, including accessibility and avoiding corrosive environments.
Details the acceptable temperature and humidity ranges for unit operation.
Describes requirements for the supporting surface and unit placement.
Lists general guidelines for installation, including environment, ventilation, and cable gauge.
Covers unit installation, optional accessories, and power connection for the Ground model.
Covers unit installation, optional accessories, and power connection for the Duo model.
Explains the wiring process for local RS-485 data bus connection and the Ground setup.
Provides instructions for completing the local connection for INGEREV CITY Duo.
Describes how LEDs indicate the charging station's current status.
Details the steps for starting, managing, and ending the charging process.
Explains how language is configured and displayed for user sessions.
Lists common incidents, their error codes, and initial troubleshooting steps.
Details the procedure for safely shutting down the charging station.
Recommends annual checks of the residual current device for safety.
Recommends annual revision of the ground connection for safety.
Guides users through troubleshooting common alarms and error codes.
Explains how to locate and reset charging station protections after a trip.
Identifies components requiring individual handling for decontamination at end of life.
Details how to separate and recycle packaging materials.
General| Brand | Ingeteam |
|---|---|
| Model | Ingerev City |
| Category | Battery Charger |
| Language | English |
To Next Page
