Need help?Do you have a question about the Ingrasys iPoMan II-1200 and is the answer not in the manual?
Instructions to prevent injury and unit damage during operation.
Precautions for safe electrical connection and operation.
Cautionary information on safe battery replacement to avoid explosion.
Essential safety measures for installing the unit in a rack.
Instructions for connecting multiple iPoMan II-1200 units in a chain.
Configuration of DIP switches for Auto and Manual daisy-chaining modes.
Accessing the main menu and entering the default password for the console.
Steps to set the IP address for network access via the console menu.
How to access and log into the unit's web interface using a browser.
How to change system parameters like date and time via the web interface.
Configuring email and SNMP trap alerts for system events.
Configuring inlet actions, outlet power status, and digital output settings.
Creating schedules for turning power outlets on or off at specific times.
Setting delay times for power on/off sequences for individual outlets.
List of error codes and their descriptions for troubleshooting device issues.
General| Model | iPoMan II-1200 |
|---|---|
| Category | Power Distribution Unit |
| Input Voltage | 200-240 VAC |
| Input Frequency | 50/60 Hz |
| Output Voltage | 200-240 VAC |
| Maximum Current per Phase | 16A |
| Number of Outlets | 12 |
| Outlet Type | IEC C13 |
| Maximum Power per Phase | 3680W |
| Form Factor | 1U Rackmount |
To Next Page
