Do you have a question about the Ingrasys nastorage 4600 series and is the answer not in the manual?
Step-by-step guide for installing hardware in the 4600T.
Guide for mounting NAS units in rack cabinets.
Procedure for inserting and securing hard disk drives.
Instructions for powering on the NAS device.
Procedure for safely powering off the NAS.
Configuring IP addresses and network settings.
System maintenance tasks and settings.
Restoring system to factory defaults.
Managing individual physical disk drives.
Creating and managing logical storage volumes.
Creating and managing logical storage volumes.
Adding, replacing, or detaching disk members.
Integrating the NAS with Windows Active Directory.
Configuring SMB/CIFS for Windows file sharing.
Configuring iSCSI storage access.
Creating new network shared folders.
Configuring Rsync for remote backups.
Configuring manual and scheduled virus scans.
Steps for replacing failed hard drives.
| Category | Network Attached Storage (NAS) |
|---|---|
| Operating System | Linux-based NAS OS |
| Storage Type | HDD |
| Form Factor | Rackmount |
| RAID Support | 0, 1, 5, 6, 10, 50, 60 |
| Processor | Intel Xeon Processor |
| Network Interfaces | 2 x 1GbE |
| Power Supply | Redundant Power Supplies |
| Power Supply Wattage | 800W |
| Management | Web-based GUI, CLI, SNMP |
| Dimensions (H x W x D) | 88mm (2U) x 447mm x 740mm |