11
Still need help? Call 800-573-2860
Step 7Position the assembled stand against a wall where you plan to use it, then follow the instructions printed on
the bag containing the tipping restraint hardware kit (
U) to attach the restraint hardware to the wall and the stand.
Note: You need a 3/8" drill bit to drill the hole for the wall anchor. The hole should be 1 1/2" deep.
For customer service, call: 877-573-2860 (U.S./Canada markets)
You’ll need:
U (1)
Phillips screwdriver
Drill
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 11 Wednesday, May 8, 2013 9:07 AM
To Next Page
Loading...
