Init NT-WG1144 User Manual

ASSEMBLY
INSTRUCTIONS
NT-WG1144
Wood and Glass TV Stand
Safety information and
specifications...........................................2
Tools needed ...........................................3
Parts ............................................................3
Hardware...................................................4
Assembly instructions ..........................5
Before using your new product, please read these instructions to prevent any damage.
NT-WG1144_13-0328_MAN_V4_ENG.fm Page 1 Wednesday, May 8, 2013 9:07 AM

Init NT-WG1144 Specifications

General

Brand	Init
Model	NT-WG1144
Category	Indoor Furnishing
Language	English

Summary

Safety Information and Specifications

Safety and Product Specifications

Details safety warnings on weight limits, overhang, small parts, and provides overall product dimensions.

Tools and Parts

Required Tools for Assembly

Lists the essential tools, such as a Phillips screwdriver and a drill, required for assembling the TV stand.

Included Parts List

Itemizes all physical components included in the package, identified by labels A through I.

Hardware and Assembly Instructions

Package Contents: Hardware

Details all necessary hardware for assembly, including various fasteners, brackets, and clips.

Assembly Step 1: Attach Shelf Frames

Connects shelf frames (A, B, C) to the rear support (D) using specified hardware.

Assembly Step 2: Attach Legs

Attaches left and right legs (E, F) to the shelf frames, ensuring flush alignment.

Assembly Step 3: Install Brackets

Connects middle rails to the rear support using left (J) and right (K) brackets.

Assembly Step 4: Attach Cable Clips

Secures cable clips (R) to the rear support (D) for cable management.

Assembly Step 5: Level the Stand

Adjusts floor levelers on the legs to ensure the TV stand is stable and level.

Assembly Step 6: Install Glass Shelves

Installs suction cups (L) and then places glass shelves (G, H, I) onto the frames.

Assembly Step 7: Secure to Wall

Attaches tipping restraint hardware (U) to the stand and wall for enhanced safety.