Injecta ELITE PRC User Manual

0000137062 Rev. 3.0
1
PACK CONTENTS
A) pH and REDOX control device
B) PVC Crystal 4x6 with suction device (2 m)
C) Polyethylene delivery hose (3m)
D) Attachment screw ( =6 mm)
E) Foot filter (PVC riser)
F) FPM duckbill valve (3/8” GAS)
G) Probes pH and Redox
H) PSS3 probe-socket (1/2” GAS)
I) Tapping saddle for securing PSS3 onto 2” hose (
=50 mm)
L) pH 4, pH 7, 465 mV, H
2
O buffer solution kit
M) Reducer for injection valve
Wall Mounting Setup
TECHNICAL SPECIFICATIONS
Dimensions (H – W – L) 234x162x108 mm
Weight 1 kg
Power supply 50 Hz 230 VAC
Consumption 12 W or 18 W
Pump flow rate 1,5 l/h; 5 l/h
Maximum back-pressure 1,5 bar
Pump state Pause - Supply
Measure scale 0 ÷ 14.0 pH; Redox 0÷ +1000 mV
pH control range 0.0 pH – 14.0 pH
Device precision +/- 0,1 pH; ± 10 mV
Accuracy ±0.02 pH; ± 3 mV
Elec
trode regulation Automatic
ATTENZIONE / WARNING / ATTENTION / ACHTUNG
pH mV
pH mV

Injecta ELITE PRC Specifications

General

Brand	Injecta
Model	ELITE PRC
Category	Water Pump
Language	English