Inkbird ITC-310T-B User Manual

Programmable Outlet Thermostat
Copyright
Copyright
©
2016 Inkbird Tech. Co., Ltd. All rights reserved. No part of this document may be reproduced
without prior written permission.
Disclaimer
Inkbird has made every effort to ensure that the information contained in this document is
complete; however, the contents of this document are subject to revision
Inkbird to ensure you have the latest v
Programmable Outlet Thermostat
ITC-310T-B
User Manual
Version 1.0
Inkbird Tech. Co., Ltd.
2016 Inkbird Tech. Co., Ltd. All rights reserved. No part of this document may be reproduced
Inkbird has made every effort to ensure that the information contained in this document is
complete; however, the contents of this document are subject to revision
without notice.
Inkbird to ensure you have the latest v
ersion of this document.
Programmable Outlet Thermostat
2016 Inkbird Tech. Co., Ltd. All rights reserved. No part of this document may be reproduced
Inkbird has made every effort to ensure that the information contained in this document is
accurate and
without notice.
Please contact

Inkbird ITC-310T-B Specifications

General

Model	ITC-310T-B
Sensor Type	NTC sensor
Alarm	High/Low Temperature Alarm
Calibration	Yes
Type	Thermostat
Temperature Control Range	-50°C to 99°C
Temperature Resolution	0.1°C
Control Type	ON/OFF
Power Supply	100-230V AC, 50/60Hz
Input Power	100-230V AC, 50/60Hz
Output Power	≤ 10A
Output	Relay output
Output Sockets	1
Display	LCD
Input Power Cable Length	1.5m
Output Power Cable Length	1.5m (4.9ft)
Sensor Cable Length	2m (6.6ft)
Temperature Measurement Accuracy	±0.5°C (±0.9°F)
Accuracy	±0.5°C (±0.9°F)

Summary

Safety Precautions

Overview

Main Features

Lists key functionalities of the ITC-310T-B thermostat.

Specifications

Keys Instruction

Key Operation Instruction

How to Set Parameters

Explains the procedure for entering and modifying device parameters.

Setup Flow Chart

Menu Instruction

Temperature Control Setting

Details parameters for temperature control, including set values and differentials.

Fahrenheit Temperature Settings

Lists temperature control parameters specifically for Fahrenheit units.

TR=1 or TR=2 Timer Modes

Explains settings for timer modes TR=1 and TR=2.

STA=12 Menu Codes

Details menu codes for setting up to 12 stages when STA is set to 12.

Temperature Setting Range (TS, HD, CD)

Alarm High/Low Limit Setting (AH, AL)

Compressor Delay (PT)

Temperature Calibration (CA)

Fahrenheit or Centigrade Unit Display (CF)

Timer-Temperature Set Values

Cycle and Auto Mode (MD, AT)

Error Description

Technical Assistance and Warranty

Technical Assistance

Provides contact information for support and troubleshooting.

Warranty

Outlines the product warranty terms and conditions.