4.1. Download the APP
Search the keyword ‘InkbirdSmart ’ in
Appstore or Google Play, or scan the
following QR code to download and
install the APP.
4.2. Pair with your phone
Open the app, it will ask you to register or
log in your account on the APP. Select the
country and enter your Mobile number or
Email to finish the registration. Then press
“Add Home” button to create your home.
Tap “+” or “add device” of the APP to add
the device. in home page
WLAN Setting in your smart phone, select
the “SmartLife-XXXX” to directly connect
to the router without putting in password.
Go back to app to enter into the automatic
connection interface.
Click “Done” after adding device succeed
ed and enter into device controlling inter
face .
Add device in AP mode:
Plug the device in the socket and make
sure that the device is in the AP Configu
ration State (the LCD symbol is flashing
slowly, interval flashing 1500ms).
Click “AP mode” to enter device adding
interface,click “Confirm indicator slowly
blink” and then select Wi-Fi network, enter
Wi-Fi password,click “confirm” to enter
connection process.
Press “Connect now” and it will go to your
If the device is in the normal working
state, you can long press 5 seconds to
reset the WIFI. It will enter the Smartconfig
configuration state by default. You can
quickly press to switch the Smartconfig
configuration state and the AP
mode. If
you change the WIFI
state, it will take
about 5 seconds to display the corrspond
ing LCD symbol and state, because of the
WIFI module data processing.
Add device in quick connection:
Plug the device in the socket and make
sure that the device is in the Smartconfig
configuration state (the LCD symbol is
flashing, interval flashing 250ms).
Click “Confirm indicator rapidly blink” and
then select Wi-Fi network, enter Wi-Fi
password,click “confirm” to enter connec
tion process.
The device only supports 2.4GHz Wi-Fi
router.
6
3
To Next Page
Loading...
