To Next PageTo Next Page
Need help?Do you have a question about the Inkema RH11 and is the answer not in the manual?
Details operational limits, voltage, power, temperature, noise, speed, and gradient.
Describes pit requirements and components for the RH11 model.
Details pit requirements and civil engineering for the RH12 self-supporting model.
Describes the platform's construction, materials, and components like hinges and safety bar.
Details the lip's material, thickness, press stroke, and milling for truck access.
Outlines the bedplate structure, front/rear assemblies, and hydraulic operation.
Lists the components and specifications of the hydraulic power unit.
Provides a diagram and component list for hydraulic unit version 03.
Presents a diagram and schematic for hydraulic unit version 07.
Lists the components of the electrical control panel.
Enumerates the various safety features and systems of the dock leveller.
Emphasizes preventive maintenance for operation and lifespan.
Details hydraulic oil replacement intervals, properties, and level checks.
Indicates the frequency and location of grease point checks.
Explains how to regulate the dock leveller's descent speed.
Describes how to regulate the lip's opening and closing speed.
Provides a detailed table outlining daily, monthly, and yearly maintenance tasks.
Guides the user on how to operate the dock leveller safely and effectively.
Details the necessary checks and procedures before operating the leveller.
Explains correct usage procedures and critical safety warnings during operation.
Describes the steps to follow after the leveller has been used.
Lists important precautions to ensure safe operation and prevent damage.
Details how to safely position the leveller within the installation pit.
Explains how to secure the leveller in the pit for embedded and self-supporting models.
Details the securing process for embedded leveller installations.
Details the securing process for self-supporting leveller installations.
Describes the procedure for installing the electrical control panel.
Outlines the final checks and procedures to complete the installation.
Details the electrical connections for the control panel.
Explains how to connect the power input for 380V and 220V systems.
Provides instructions for connecting the motor input.
Details the connection of electro valves to the control panel.
Explains the function of each terminal on the connection block.
Guides on selecting different operation types using micro switches.
Explains the function of the timer for regulating raising time.
Details how the leveller operates based on the selected mode.
Mentions the Radio Card accessory and its function.
Lists characteristics such as power supply, fuse, and operating temperature.
Details the steps for dismantling an embedded leveller.
Details the steps for dismantling a self-supporting leveller.
Provides steps to diagnose and fix issues with the control panel not lighting up.
Lists checks for voltage, motor, and contactor issues when the ramp doesn't rise.
Diagnoses issues related to the electro valve, cabling, and power unit when the leveller doesn't descend.
Addresses problems with the lip's opening speed, including sequence valve and lip stiffness.
Explains potential causes like reversed sleeves or sequence valve issues.
General| Brand | Inkema |
|---|---|
| Model | RH11 |
| Category | Docking Station |
| Language | English |
