Need help?Do you have a question about the Inland 08419 and is the answer not in the manual?
Lists and shows the power adapter, driver CD, USB cable, and mounting screws included with the enclosure.
Unpack the enclosure, remove the cover to prepare for drive installation.
Identify the SATA connector on the hard drive.
Line up the drive's SATA connector with the enclosure's connector and carefully insert the drive.
Align the cover screw holes, install the four black screws on top and four silver screws on the bottom.
Attach the power adapter to an outlet and the enclosure, then connect the USB cable to the enclosure.
Connect the USB cable to a computer and switch on the enclosure.
Confirms the enclosure setup is complete and mentions One Touch Backup features.
Provides links to the product page and support page for software, downloads, and help.
To Next Page
General