Introduction
Congratulations, and thank you for choosing InLine® Bluetooth Speakerphone.
This manual will help you to operate the Bluetooth Speakerphone, but you should
first familiarize yourself with the Bluetooth® functionality of your mobile phone or
other devices before using the Bluetooth® Speakerphone.
Safety Rules
(1) Please follow the rules depicted in this manual closely to ensure your safety. Before
using this Bluetooth® speakerphone, we would strongly encourage you to read
through this user manual.
(2) Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging
so as to prevent any possible injury or damage.
(3) Do not modify, repair or dismantle this Bluetooth® speakerphone, doing so,may result
in fires, electric shocks, complete breakdown of this Bluetooth® speakerphone, etc. All
of which, are not covered under warranty.
(4) Do not use any diluents or volatile liquid to clean the Bluetooth® speakerphone.
(5) Do not use the Bluetooth® speakerphone in a hazardous location.
(6) This device includes a rechargeable Lithium-Ion or Lithium-Polymer battery,
for the transportation of this device in your luggage please note the safety
instructions of your airline.
Package includes
Bluetooth® Speakerphone MicroUSB charging cable 3.5mm audio cable user manual
CHARGING THE BATTERY
1. Plug the USB charging cable into this Bluetooth® Speakerphone.
2. Plug the other end of the USB charging cable into your computer or AC charger
with USB port.
3. The red LED light is on when charging.
4. When the battery is fully charged, the red LED light turns off and turns on in solid blue.
Important
• For the first time use, please charge the speakerphone fully before using.
TURNING SPEAKERPHONE ON/OFF
To turn on:
Press and hold the MF-button for 3 seconds when the device is off. The blue LED light flashes
3 times and you can hear the voice prompt.
To turn off:
Press and hold the MF-button for 4 seconds when the device is on. The blue LED light flashes
twice and then turns off, you can hear 4 beeps and the voice prompt.
PAIRING THE SPEAKERPHONE
You are required to pair the speakerphone with your mobile phone or other Bluetooth
devices once before using it.
1. Turn on the speakerphone.
2. Press and hold the MF-button for 5 seconds.
The LED light flashes in blue and red alternatively.
3. Set your phone or other Bluetooth devices to discover ‘INLINE_BT’ and follow the
instruction.
4. If your phone asks for passkey or PIN-code, confirm with 0000 (4 zeros).
5. You will hear the voice prompt of ‘Phone one connected’ or ‘Phone two connected’ when
the Bluetooth speakerphone is connected to your phone or other Bluetooth devices.
AUTOMATIC PAIRING MODE
If there is no paired device in the range, you can turn on the Bluetooth speakerphone (press
and hold the MF-button for 3 seconds) and it will go into pairing mode automatically after
15 seconds.
Note:
If the Bluetooth speakerphone is not in a pairing mode, your mobile phone or other Bluetooth
devices will not find it. Please set the speakerphone into pairing mode before making your
mobile phone search for the Bluetooth speakerphone.
PAIRING THE SPEAKERPHONE WITH THE SECOND MOBILE PHONE
This device supports multipoint. This means it can be paired and connected with
2 mobile phones at the same time.
1. Pair and connect the speakerphone with the first mobile phone.
(Please refer to the ‘PAIRING THE SPEAKERPHONE’.)
2. Turn off the speakerphone.
3. Press and hold the MF-button to go to the pairing mode and connect with
second mobile phone.
4. Turn off the speakerphone after connecting with second mobile phone.
5. Turn on the speakerphone, two mobile phones will connect with the Bluetooth
Speakerphone at the same time.
LANGUAGE SELECTION
Press and hold the MF-button for 3 seconds in the state of pairing mode. The blue LED light
flashes and you can hear the voice prompt in 5 languages. You can press the MF-button to
select your preferred language accordingly.
VOICE RECOGNITION
This Bluetooth speakerphone supports VOICE RECOGNITION in English. When there
is incoming call, you will hear the voice prompt 'Say a Command: Answer/Irgnore', you
can say 'Answer' to answer the call or 'Ignore' to reject the call within 2 seconds after the
voice prompt. If you do not say a command within 2 seconds, this device will recognize it
as an invalid command, then you should answer or reject the call manually.
Note: The feature of voice recognition may not work normally due to different English
accent or other sounds around.
MAKING CALLS
Once the speakerphone is successfully paired and connected with your mobile phone, you
can use it to make and receive calls.The speakerphone can be used with voice dialing if your
mobile phone supports this feature.
Please check your mobile phone’s manual for more information.
1. Using voice dialing:
Press and hold the MF-button for 3 seconds, and you will hear 3 beeps, wait for a voice
prompt and say the name of the person you want to call. (Some mobile phones may not
support this feature.)
2. Using the phone keys to make calls:
Enter and dial the number on the mobile phone as you normally do. Once the call has been
set up, the sound will be transmitted to the speakerphone automatically.
3. Redial:
Short press the MF-button twice to redial the last number.
ANSWERING/ENDING/REJECTING CALLS
When the speakerphone is turned on and there is an incoming call, you will hear a musical
tone or beep (This is subject to the mobile phone.).
-Press the MF-button to answer the call.
-Press the MF-button to end the call.
-Press and hold the MF-button for 2 seconds to reject the call.
TRANSFERRING CALLS
To transfer a call to the mobile phone and back:
During both incoming call and outgoing call state, you can press and hold the MF-button
for 2 seconds to transfer the call to the mobile phone, you can hear 4 beeps. If you want to
transfer the call back to the speakerphone, press and hold the MF-button for 2 seconds
again, you can hear 3 beeps. Some mobile phones may require more confirmation.
ADJUST THE VOLUME
Short press the “VOL+” for volume up.
Short press the “VOL-” for volume down.
PLAY/PAUSE THE MUSIC
Press MF-button to play when the music is paused and press MF-button to pause
when the music is playing.
NEXT SONG/PREVIOUS SONG
Short press the “>>” for next song
Short press the “<<” for previous song
WHEN THE BATTERY IS LOW
The red LED will wink when the battery is low. At the same time, you can hear 5 quick beeps.
At this time, please charge your Bluetooth Speakerphone.
Important
• You must use the authorized charger to charge the speakerphone.
• You must charge the Bluetooth® speakerphone if it has been not used for more than
12 months.
FACTORY RESET
To factory reset the speakerphone, press and hold the MF-button and “VOL-” at the same
time for 3 seconds, the blue LED flashes quickly.
Supports audio line-in
This Bluetooth Speakerphone supports 3.5mm audio line-in with another device even when
it is Bluetooth-connected with your mobile phone. When your mobile phone has been
connected with the speakerphone by Bluetooth, and you want to use your MP3 or other
mobile phone to play music from this speakerphone, then you can connect the speakerphone
with this other device by the 3.5mm cable. When the speakerphone is connected by 3.5 cable,
it will play the music of 3.5mm cable preferentially. When the speakerphone is Bluetooth-
-connected with one device and cable-connected with another device, the buttons still work,
but only for the Bluetooth-connected device, the buttons at this status are not for the cable-
-connected device.
InLine® Bluetooth
Speakerphone
Wireless Speaker
with hands-free
User manual
Bluetooth® V3.0 Speakerphone supports
Voice Prompt, Multipoint, Voice Recognition.
www.inline-info.com
Overview of the Bluetooth Speaker:
(1). Previous song
(2). Next song
(3). On /off /MF Button
(4). Vol-
(5). Vol+
(6). Microphone
(7). LED
(8). 3.5mm Audio jack
(9). MicroUSB charging jack
(3)
(1)
(2)
(5)
(4)
(9)
(8)
(7)
(6)
反面 英文
To Previous Page
Loading...