Getting Started with the EXPLORER 700 Page 2
2 Introducing the terminal
This section introduces the physical characteristics, interfaces and services available on the Thrane
& Thrane EXPLORER 700 (called the EXPLORER 700 in the rest of this document).
2.1 Physical characteristics
Item Specification
Manufacturer Thrane & Thrane
Physical dimensions
Approx. 297 mm x 399 mm x 52 mm
(11.7 in. x 15.7in. x 2in.)
Weight (including battery) 3.2 kg (7 lbs)
External power 100-240 Volts AC (47-63Hz)
Battery life
Transmit: 1.5hrs at 492kbps
Stand-by time: 36hrs
Ingress protection
IP 52 – transceiver
IP66 – antenna
2.2 Interfaces
Interface Equipment needed
2 x RJ45, Auto cross-over
MDI/MDI-X
(IEEE 802.3 10/100BASE-T)
IP data device, LAN-enabled
USB v1.1 IP data device, USB-enabled
2 x Phone/fax RJ11 RJ11 handset, G3 fax machine
2 x ISDN RJ45 RJ45 handset, ISDN data device
WLAN Access Point
(IEEE 802.11 a/b/g)
IP data device, wireless-enabled
Bluetooth v1.2 Bluetooth handset, headset or Bluetooth data device
2.3 Services
Services Specification
Standard IP data Up to 492kbps (send and receive)
Streaming IP data
32kbps, 64kbps, 128kbps, 256kbps (Multiple streaming
sessions simultaneously)
Phone/fax Standard (4kbps) or Premium (3.1kHz)
ISDN data UDI/RDI (64kbps)
Text
To other BGAN terminals or cellular mobile phones.
From other BGAN terminals, and some mobile phones,
depending on service provider.
To Next Page