6-1-2：We offer myopia lenses from 0-500 degrees, so you can select the appropriate myopia lenses accordingly (please consult your supplier for
the custom-tailored myopia lenses).
6-1-3：Install the lenses on the brackets separately on the left and right sides of each nose pad; attention is required to distinguish between the left
and right lens; and align them with the empty area on the frame. If possible, please wear a pair of gloves to prevent fingerprint oil contamination.
6-2-1：Put on your glasses and make sure they are turned on.
6-2-2：Fine-tune the glasses up and down, left and right, and adjust them to the position where you can see the clearest image.
6-2-3：Adjust the width of the nose pads, so the position of the glasses on your face can be adjusted up and down.
* It is not recommended for non -professionals to disassemble the lenses. If you want to replace them, please contact the after-sales hotline.
The shading lenses can be placed and removed on the frame through a buckle. Align the lenses with the buckle area,
and then press them to snap them on.
6-2 Accommodate to your comfortableness
6-3 How to remove and install the shading lenses
To Next Page
Loading...