WARNING: Always switch off the electricity supply before performing maintenance work. In the event of a
fault, contact customer services.
Damaged power cables should be replaced by a competent person or qualified electrician.
For domestic use only.
Never place an empty pan on the hob as this will cause the overheat sensor to switch off the appliance
automatically.
When a cooking zone has been on for a long time, the surface remains hot and shows “H” in the display.
If the surface of the hob becomes cracked, do not use, switch off the appliance at the fused spur and
contact customer services.
Do not place rough or uneven vessels on the hob, as they could damage the glass surface.
Avoid banging pots and pans down on the hob. The induction surface is tough but not unbreakable.
Do not put detergents or flammable materials beneath the hob.
Care & maintenance
To Next Page