What to do if the current value of the cable is invalid for Innohome Charlie?
If the charging process has failed due to an invalid current value of the cable, first check the cable connector for any damages. If you find that the cable connector is broken, replace the charging cable and try again. If the issue continues, please contact a qualified electrician.
What to do if the power relay is faulty in Innohome Automobile Accessories?
If the charging station is not operational due to a faulty power relay, turn the circuit breaker off, wait for 5 seconds, and then turn it back on. If the problem persists after this, contact a qualified electrician to inspect the device configuration.
How to fix device configuration error in Innohome Charlie Automobile Accessories?
If there's a device configuration error because the charging station isn't set up correctly, contact a qualified electrician to check the device configuration. Turn the circuit breaker off and re-configure the DIP switches.
Why is the charging current limited with high temperature for Innohome Charlie?
The charging current is limited to 6A because the vehicle is being charged, but the charging has been limited due to a high internal temperature.
Details safety signs, work practices, and electrical hazards.
Defines the purpose and technical specifications of the charging station.
Outlines necessary qualifications and pre-installation communication.
Lists all included parts, accessories, and internal components.
Details conditions under which the warranty is voided.
Ensures all parts are present, tools are ready, and power is disconnected.
Step-by-step guide to safely disconnect the power supply.
Instructions for installing the charging station using the bottom-side cable inlet.
Instructions for installing the charging station using the back-side cable inlet.
Details wiring for 1-phase, IT grid, and 3-phase power supplies.
Configures charging current and standalone operation via DIP switches.
Sets up host/client units and RS-485 termination for load balancing.
Utilizes external signals to limit charging current to 8A.
Instructions for securely reattaching the charging station cover.
Guides through connecting power, performing measurements, and testing.
Explains how to connect the vehicle and the charging cable.
Describes the meaning of LED colors and patterns.
Lists possible causes and details for LED light combinations.
Declares conformity with EU directives and harmonized standards.
Provides instructions for the environmentally sound disposal of the equipment.
Provides contact details, website, and copyright notice.
General| Brand | Innohome |
|---|---|
| Model | Charlie |
| Category | Automobile Accessories |
| Language | English |
To Next Page