What to do if INNOLIVING INN-014 Medical Equipment shows error code E6?
If the INNOLIVING Medical Equipment displays error code 6 (E6), this indicates a low battery. Replace the batteries to resolve this issue.
What to do if INNOLIVING INN-014 Medical Equipment shows error code E1?
If the INNOLIVING Medical Equipment displays error code 1 (E1), it means that the cuff is not fastened properly or is not in the correct position. Ensure the cuff is applied correctly and sit comfortably and still, keeping the cuff at the same level as your heart.
How to fix a blank display on INNOLIVING INN-014 Medical Equipment?
If nothing appears on the display of your INNOLIVING Medical Equipment, even when it's turned on, the batteries may be drained. Replace all batteries with new ones. Also, check that the battery polarities are correctly aligned, with the negative and positive ends matching the indications in the battery compartment; if they aren't, re-install them correctly.
General| Category | Medical Equipment |
|---|---|
| Model | INN-014 |
| Brand | INNOLIVING |
| Type | Pulse Oximeter |
| SpO2 Measuring Range | 70% - 99% |
| Display | OLED |
| Power | 2 x AAA batteries |
| PR Measuring Range | 30 BPM - 240 BPM |
To Next Page