INNOLIVING INN-069 - User Manual

Questions and Answers

C
Connie MillerAug 10, 2025
What to do if my INNOLIVING INN-069 Humidifier produces no mist?
- J
  John Williams Jr.Aug 10, 2025
  If your INNOLIVING Humidifier isn't producing mist, several factors could be the cause. First, ensure the water tank isn't empty by adding water. Next, check that the humidifier is turned ON by rotating the knob clockwise. Make sure the humidifier is placed on a flat, hard, and stable surface. Also, the water in the tank may be dirty or has been left too long, so clean the tank and refill it with fresh water. If you used cleaner to clean the water tank, use fresh water to completely clean the water tank, and dry it. If none of these steps work, the transducer or the fan may not be working, and it should be sent to after-sales service for maintenance.
J
jacob73Aug 17, 2025
Why is my INNOLIVING INN-069 Humidifier not turning on?
- A
  albert98Aug 17, 2025
  If the power-on light of your INNOLIVING Humidifier doesn't illuminate and the unit isn't working, it could be due to a couple of reasons. First, ensure the humidifier is properly connected to the mains by verifying the plug is correctly inserted into a live wall socket. Secondly, check that the humidifier is actually turned ON by rotating the knob in a clockwise direction.
D
David JohnsonAug 22, 2025
How to get rid of bad smell from INNOLIVING Humidifier?
- R
  Robert HigginsAug 22, 2025
  If your INNOLIVING Humidifier is emitting an unpleasant smell, there are a couple of potential reasons. If the humidifier is new, remove the cap of the water tank and leave the tank open in a cold place for at least 12 hours. Alternatively, the water in the tank might be stale or dirty; in this case, clean the water tank and fill it with fresh water.
Q
qcohenAug 28, 2025
Why INNOLIVING INN-069 or windows get wet?
- J
  Joyce BellAug 28, 2025
  If you notice that your INNOLIVING Humidifier or windows are getting wet, it's likely because the room is small or the humidity level is already high. Try turning down the mist volume or shutting down the humidifier.
A
Anthony ComptonSep 3, 2025
What causes transducer scaling in INNOLIVING INN-069?
- P
  Philip TylerSep 3, 2025
  Transducer scaling in your INNOLIVING Humidifier may be caused by high water hardness. To resolve this, use distilled water or water with low hardness.

INNOLIVING INN-069 Specifications

General

Brand	INNOLIVING
Model	INN-069
Category	Humidifier
Language	English

INNOLIVING INN-069 - User Manual

Table of Contents

Questions and Answers

INNOLIVING INN-069 Specifications