27
28
TECHNICAL DATA*
Sensor Fuel Cell Sensor
Accuracy +/- 0.05‰ (per mill) with reference
to 0.50‰ at 25°C (per mill = default
setting)
OR +/- 0.005% BAC (Blood Alcohol
Concentration) with reference to 0.050%
BAC at 25°C
OR +/- 0.025mg/L with reference to
0.250mg/L at 25°C
Detection
Range
0.00 up to 2.00‰ (per mill)
OR 0.000 up to 0.200% BAC (USA)
OR 0.000 up to 1.000mg/L (UK)
Warm-up
Time
Within 10 up to 15 seconds at 0.5‰, it
may vary depending on the value of per
mill / BAC which was measured
Dimension 104 x 40 x 17mm (L x W x H)
Weight Approx. 55g (1 battery included)
Power
Supply
1 piece of 1.5V AA Alkaline battery
Working
Temperature
10°C up to 40°C
Storage
Temperature
10°C up to 40°C
Calibration Recommendation: Every 6 up to 12
months or after 300 tests (depending
which incident happens first). For a
calibration service you can send the
device to ACE Instruments (see www.
alkomat.net).
* The technical data are subject to change without prior
notice for functional improvements.
EN – Operating Manual
To Next Page
Loading...
