Need help?Do you have a question about the INNOSILICON T2T and is the answer not in the manual?
General| Brand | INNOSILICON |
|---|---|
| Model | T2T |
| Category | Power Supply |
| Language | English |
Remove screws and spacer to detach PSU cables connected to the hashboard.
Unfasten the five screws that secure the PSU unit to its chassis.
Carefully disconnect the two cables linking the PSU and the control board.
Release seven connectors from the control board, pressing buckles for removal.
Insert the control board into its slot, ensuring metal buckles engage properly.
Connect cables 1-5 to slots 1-5, observing the anti-reverse connection design.
Connect the PSU to the control board's socket, as illustrated.
Re-install the five PSU mounting screws to fix the unit in place.
Attach PSU cables to the PSU using screws and spacer, ensuring they are tight.
To Next Page