Need help?Do you have a question about the Innotech ID-767 and is the answer not in the manual?
Details on how to install batteries for CR2032 and AAA models, ensuring correct polarity.
Instructions for proper scale usage: stand evenly distributed and remain still for accurate measurement.
The scale automatically switches off when you step off, conserving power.
Procedure for calibrating the scale on a flat surface to ensure accurate readings.
Notification when the scale displays 'LO', indicating the need to replace batteries.
Indicates when the scale is overloaded (over 397lb/180kg) by displaying 'Err'.
Information on changing measurement units (lb, kg, st) via a button on the scale's back.
Specifies the required batteries: two CR2032 coin batteries or three AAA batteries.
Guidance on cleaning the scale using a damp lint-free cloth, with mild soap if needed.
Steps to replace batteries by opening the battery cover and inserting new ones.
Advice on disposing of the device and batteries according to local regulations.
To Next Page
General