Innov K2 User Manual (English)

To Next Page

INNOVV K2 Lens Installation Guide

Two CNC aluminium lens mounts are included with the K2 camera set. These are extremely well made and

very robust.

Modular Mounting Kit - Supplied with 2 modular mounting kits. These can be utilised/adapted to suit the

needs of most bikes.

Lens Locations - Things to consider here. The lenses have a 120 degree angle so try to pick the best

location to ensure a full field of view of the road ahead and behind. The ‘Live’ option in the K2 App is a

great tool to help you adjust and obtain the perfect field of view.

Front/Back Lens Selection - You can use either length lens cables (1.5/3.0mtr) as front/back, whichever

suits your bike set up.

Lens Mounts - Secure the lenses well. Vibration will affect video quality. When deciding on lens location

ensure that the lens/holder can be secured down well to limit vibration as best as possible.

Lens Cables - The cables are specifically made for the job. But please plan the route of the lens cable to

ensure they are not exposed to excessive heat or bending.

Connection to DVR - The lenses are provided with screw down ‘Type C’ connectors. These need to be

screwed in firmly to maintain a good connection.

Lens Maintanance - Give the lenses a regular clean as dust and dirt will affect the quality of your video

footage.

Securing Lens in Mount - When placing the lens into the mount please make reference to guide below.

Please do not apply pressure direct to the Lens.

Need help?

Do you have a question about the Innov K2 and is the answer not in the manual?

Innov K2 Specifications

General