Innova 2.0 10 HP - User Manual

Questions and Answers

R
reidloriAug 16, 2025
Why Innova 2.0 10 HP Air Conditioner doesn't cool/heat enough?
- D
  Dillon RitterAug 16, 2025
  If your Innova Air Conditioner isn't cooling or heating sufficiently, there might be several reasons. First, verify that the set temperature isn't too high or low by checking the remote. Also, a clogged air filter can restrict airflow, so inspect and clean it if needed. Ensure that nothing is blocking the air flow around the unit. Finally, consider whether the thermal load in the room has increased, for example, by leaving a window or door open, or using appliances that generate a lot of heat. To reduce thermal load, cover windows exposed to sunlight, keep the room closed as much as possible, and avoid using high-energy appliances in the room.
M
Matthew MullinsAug 19, 2025
What to do if Innova 2.0 10 HP Air Conditioner doesn't switch on?
- B
  Benjamin ThomasAug 19, 2025
  If your Innova Air Conditioner isn't turning on, start by checking the power supply, for example, by turning the light on. Ensure that the exclusive magneto-thermic switch hasn't tripped; if it has, reset it. If it immediately trips again, contact the Service Centre. Also, check the batteries and replace them if necessary by using the touch-screen display.
C
curtisortegaAug 22, 2025
What does alarm OF mean on Innova Air Conditioner?
- T
  Tricia SmithAug 22, 2025
  The alarm OF on your Innova Air Conditioner indicates that the maximum level float intervention. During cooling and dehumidification, the system switches off the compressor and activates the water distribution system to disperse excess water. During heating, condensation should drain freely through the pipe. Check that the condensation pipe is not bent or obstructed, preventing water outflow.
L
Lisa StricklandAug 25, 2025
What does alarm displayed CP mean on Innova Air Conditioner?
- D
  Dr. Jacob GallagherAug 26, 2025
  Alarm CP on your Innova Air Conditioner means that the CP contact is open. The appliance will only function if this contact is closed, so check that the clamps are securely connected.
S
Sharon RichardsAug 27, 2025
What does alarm displayed E1 mean on Innova 2.0 10 HP Air Conditioner?
- D
  Derek WilliamsAug 28, 2025
  Alarm E1 on your Innova Air Conditioner indicates a broken room temperature RT sensor. You can still use the Cooling, Dehumidification, and Heating modes, as this sensor only monitors the antifreeze function of the internal battery.
C
christopher36Aug 30, 2025
What does alarm displayed E4 mean on Innova Air Conditioner?
- S
  Shannon BrewerAug 30, 2025
  Alarm E4 on your Innova Air Conditioner signals a broken outside battery OPT sensor. You can still use the Cooling, Dehumidification, and Heating modes, but defrosting will occur at fixed intervals.
N
Nicole DyerSep 2, 2025
What does alarm displayed E2 mean on Innova 2.0 10 HP Air Conditioner?
- E
  Erika SmithSep 2, 2025
  Alarm E2 on your Innova Air Conditioner indicates a broken internal battery IPT sensor. None of the functioning modes will work.
C
chrisandersonSep 4, 2025
What does alarm displayed E3 mean on Innova 2.0 10 HP Air Conditioner?
- Y
  Yolanda BishopSep 5, 2025
  Alarm E3 on your Innova Air Conditioner means there is a broken outside temperature OT sensor. Consequently, none of the functioning modes will work.
C
Charles HutchinsonSep 7, 2025
What does alarm displayed E5 mean on Innova 2.0 10 HP Air Conditioner?
- M
  Meghan BuchananSep 7, 2025
  Alarm E5 on your Innova Air Conditioner indicates a broken internal ventilator motor. Therefore, none of the functioning modes will work.
W
wmorrisSep 10, 2025
What does alarm displayed E6 mean on Innova 2.0 10 HP?
- L
  Luis WilsonSep 10, 2025
  Alarm E6 on your Innova Air Conditioner indicates a broken external ventilator motor. As a result, none of the functioning modes will work.