Need help?Do you have a question about the Innova 3320 and is the answer not in the manual?
General| Auto-Ranging | Yes |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Test | 1.5V, 9V |
| Overload Protection | Yes |
| Battery | 2 x AA |
| DC Current Range | 10A |
| AC Current Range | 10A |
| Resistance Range | 400Ω to 40MΩ |
| Capacitance Range | 40nF, 400nF, 4µF, 40µF, 100µF |
| Frequency Range | 10Hz to 10MHz |
| Temperature Range | -40°C to 1000°C |
Measures DC volts up to 600V.
Measures AC volts up to 600V.
Measures resistance up to 20M Ohms.
Measures AC current from 0-200mA.
Used for testing diodes.
Checks for continuity between points.
Ports for connecting test leads.
Measures DC current up to 10A.
Measures DC current from 0-200mA.
Tests battery charge levels using LEDs.
Turns the multimeter off.
Controls measurement mode and range.
Shows measurement results.
Guide to measuring AC and DC voltages.
Procedure for resistance tests on dead circuits.
Steps to test diodes.
How to perform continuity checks.
Procedure for measuring current, with safety notes.
Steps to test batteries using the multimeter.
Steps to replace batteries and fuses.
Guidelines for keeping the meter clean and functional.
Overview of the multimeter's capabilities.
Conditions for using and storing the device.
Details on power source and protection fuse.
Physical measurements and mass of the multimeter.
Accuracy and range for DC voltage measurements.
Accuracy and range for AC voltage measurements.
Accuracy and range for resistance measurements.
Accuracy and range for DC current measurements.
Accuracy and range for AC current measurements.
LED voltage thresholds for battery status.
Parameters for diode testing.
Parameters for continuity testing.
Details on product warranty coverage and limitations.
To Next Page
