Innova ITM5900 - User Manual

Heavy Duty Deluxe Inversion Table
Model ITM5900
Owner’s Manual Version:200822JJ
WARNING:
BE SURE to read this manual in its ENTIRETY prior
to installing and using the inversion table.
DO NOT USE inversion table without the approval
of a licensed physician. Some medical conditions
may not be suitable for use with this product.
CAREFULLY READ all Warnings and Instructions
before using this inversion table. Misuse of this
equipment may result in serious injury.
BODY WEIGHT will put pressure on ankles while
inverting. New users are advised to start at lower
setting (15 or 30) and to wear athletic shoes.
DO NOT let children under the age of 13 use the
inversion table.
DO NOT allow children, bystanders, or pets around
while using this equipment.
DO NOT put hand or fingers inside the Protective
Cover for the Angle Selector Pin.
TO PREVENT unauthorized usage, it is strongly
recommended you purchase a lock to fasten the
Height Adjustment Tube to the Cross Bar.
KEEP FINGERS, feet, clothing, and hair free of all
moving parts.
ALWAYS use all basic safety precautions when
using any electrical products.
TIGHTEN ALL nuts, bolts, and screws BEFORE
using equipment.
LEAVE adequate space to invert.
This equipment is for indoor, household and
non-institutional use only.
Questions/Comments
Innova Products Inc. is committed to providing the best quality and customer satisfaction
for all products we distribute. If you are dissatisfied with your purchase or need assistance,
please do not hesitate to contact us.
Phone: (408) 541-1866
Monday through Friday
8:00 am – 4:00 pm Pacific Time
Email: support@innovaproductsinc.com
Note: This product is
designed to adjust from 4’10”
to 6’6” with a Maximum User
Weight of 300 LBS
Images may be slightly different
from actual product.

Summary

WARNING

Questions;Comments

Product Warranty

One-Year Limited Liability

Outlines the duration and scope of the limited warranty.

Warnings and Precautions

Before Using the Inversion Table

Warning Labels

Identifies and explains the purpose of various warning labels on the unit.

Components For Assembly

Step 1 Components

Identifies parts for the initial assembly stage.

Step 2 Components

Identifies parts for the second stage of assembly.

Step 3 Component

Identifies parts for the third assembly stage.

Step 4 Components

Identifies parts for the fourth assembly stage.

Step 5 Components

Identifies parts for the fifth assembly stage.

Step 6 Components

Identifies parts for the final assembly stage.

Step 1 - Base Frame Assembly

Step 2 - Handlebars Assembly

Step 3 - Pre-Installed Backrest to Base Frame

Step 4 - Height Adjustment Tube and Ankle Holders

Step 5 - Height Adjustment Tube & Protective Cover Assembly

Step 6 - Installing Heat;Massage Pad

Safety Instructions for Massage;Heat Pad

Controller Instructions

FCC Statement Note

Preparing to Invert 1: Inversion Angle and Height Setting

Select Inversion Angle

Explains how to choose the desired inversion slope using the selector pin.

Adjust to Your Height Setting

Details how to set the table height for optimal user fit and comfort.

Preparing to Invert 2: Securing Your Ankles

How to Invert

Frequently Asked Questions (FAQs)

Storage & Maintenance

Customer Service Contact Information

Innova ITM5900 Specifications

General

Type	Inversion Table
Weight Capacity	300 lbs
Adjustable Headrest	Yes
Ergonomic Ankle Holding System	Yes
True Balance System	Yes
Material	Steel frame
Adjustable Height	4'10" to 6'6"
Assembled Dimensions	28"