Need help?Do you have a question about the Innova M Series and is the answer not in the manual?
General| Brand | Innova |
|---|---|
| Model | M Series |
| Category | Industrial Equipment |
| Language | English |
ABM is dedicated to ensuring safe operation, providing precautions to avoid accidents.
Operator responsibility for conservation of assets and persons; safety is first consideration.
General safety factors to observe for safe operation of the INNOVA machine.
Check for visible damage upon receipt; components may vary by machine version.
Confirm electronics are functioning properly; warnings about electrical hazards.
Inspect sewhead for obstructions and test basic operations like needle movement and speed.
Steps for rotating the sewhead for ease of material, head, and roller removal, and maintenance.
Detailed steps to return the sewing head to its original position after rotation.
Instructions on how to properly install the extension plate onto the machine.
Step-by-step guide on how to thread the sewing head with thread from the cone.
Instructions for removing the old bobbin and inserting a new bobbin case.
Guidance on how to attach the leaders to the machine bars for fabric loading.
Detailed steps for measuring, preparing, and loading quilt backing, batting, and quilt top.
Procedures for moving the quilt forward on the frame to continue quilting.
Guide to setting and adjusting bobbin and top thread tension for optimal stitch quality.
Steps to resolve common problems related to thread, such as breakage or lint.
Specific advice and checks to prevent and fix thread breakage during operation.
Overview of the controller's functions and the user interface for machine operation.
How to access the main and sleep screens of the machine's user interface.
Explanation of the main screen's layout and available controls for quilting.
How to use the Cruise Control feature for consistent sewing speed.
Setting the needle position (up or down) when the machine stops sewing.
Functionality and settings for the thread break sensor to detect thread issues.
Overview of controls for selecting manual mode or preset stitch regulation.
Understanding and using stitch regulation for consistent stitches per inch.
Displays fault codes and descriptions when the machine encounters problems.
Step-by-step guide for operating the machine in manual mode.
Step-by-step guide for operating the machine in stitch regulated mode.
List of essential tools needed for performing maintenance on the INNOVA machine.
Guidance on selecting and installing the correct needle size and type.
Step-by-step guide on how to thread the sewing head with thread from the cone.
Instructions on where and how to apply oil for proper machine lubrication.
Information on removing and adjusting the rotary thread tension assembly.
Detailed procedure for setting the correct hook timing relative to the needle.
How to adjust the hook positioning finger for correct hook engagement.
Procedures for setting the correct height of the presser foot.
Procedures for removing and installing key machine parts like needle and presser bars.
Instructions on how to install the eDrawings viewer to access parts diagrams.
Guidance on navigating and using the eDrawings program for viewing parts diagrams.
Daily cleaning procedures for the needle plate, bobbin case, and sewing area.
Detailed steps for cleaning the hook assembly and its raceway.
Procedures for cleaning the needle bar and presser bar assemblies.
Recommended monthly cleaning tasks for the sewhead casting and moving parts.
To Next Page
