EasyManua.ls Logo

innovair HABITAT TIN414C2V34 User Manual

innovair HABITAT TIN414C2V34
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HABITAT
INSTALLATION
MANUAL
TIN414C1V34
TIN414C2V34
TIN520C2V34
TIN625C2V34
WARNING
The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments
Installation or repairs made by unqualified persons can result in hazards to you and others.
Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
This service is only for service engineer to use.
INVERTER MINI SPLIT
V34 SERIES

Questions and Answers:

innovair HABITAT TIN414C2V34 Specifications

General IconGeneral
Brandinnovair
ModelHABITAT TIN414C2V34
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Precautions

Product Use Safety Warnings

Critical warnings and precautions for using the air conditioner safely.

Electrical Safety Guidelines

Important warnings related to electrical connections and safety.

Installation Safety Warnings

Key warnings that must be followed during the installation process.

Refrigerant Handling Safety

Specific warnings for air conditioners using R32 or R290 refrigerant.

Troubleshooting Guide

Common Issues and Solutions

Lists common problems and their possible causes without requiring repairs.

Addressing Poor Cooling Performance

Identifies causes and solutions for poor cooling performance.

Resolving Unit Operation Issues

Addresses issues where the unit fails to turn on or stops frequently.

Indoor Unit Installation Summary

Signal and Power Cable Connection

Detailed steps for connecting signal and power cables.

Outdoor Unit Installation Guide

Refrigerant Piping Connection

Air Evacuation Process

Step-by-Step Evacuation Instructions

Step-by-step guide for evacuating the refrigerant circuit.

Electrical and Gas Leak Checks

Electrical Safety Verification

Verifying the safety and proper operation of the unit's electrical system.

Gas Leak Detection Methods

Methods for checking for refrigerant leaks using soap and water or a detector.

Test Run Procedure

Performing the Test Run

Steps to perform a comprehensive test run of the installed unit.

Related product manuals