EasyManua.ls Logo

innovair HABITAT TIN520C2V34 User Manual

innovair HABITAT TIN520C2V34
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HABITAT
INSTALLATION
MANUAL
TIN414C1V34
TIN414C2V34
TIN520C2V34
TIN625C2V34
WARNING
The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments
Installation or repairs made by unqualified persons can result in hazards to you and others.
Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
This service is only for service engineer to use.
INVERTER MINI SPLIT
V34 SERIES

Questions and Answers:

innovair HABITAT TIN520C2V34 Specifications

General IconGeneral
Brandinnovair
ModelHABITAT TIN520C2V34
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Precautions

Product Use Warnings

Lists critical safety warnings regarding appliance operation, potential hazards, and proper usage.

Electrical Safety Guidelines

Critical safety guidelines for electrical connections, wiring, and power supply.

Installation Safety Warnings

Safety guidelines and requirements for proper installation by qualified personnel.

R32/R290 Refrigerant Safety

Safety warnings and requirements for handling units with R32/R290 refrigerant.

Care and Maintenance

Troubleshooting Common Issues

Indoor Unit Installation Guide

Selecting Indoor Unit Location

Guidelines for choosing the most suitable location for the indoor unit.

Drilling Wall Hole for Piping

Procedure for drilling the wall hole for piping and cables, including angle and size.

Refrigerant Piping Preparation

Instructions for preparing the refrigerant piping before passing it through the wall.

Drain Hose Connection

Steps for connecting the drain hose for proper water drainage.

Electrical Work Regulations

Essential regulations and safety warnings before starting electrical work.

Connecting Signal and Power Cables

Instructions for connecting the signal and power cables between units.

Bundling Piping and Cables

Instructions on bundling and wrapping pipes, drain hose, and cables for protection.

Mounting the Indoor Unit

Final steps for mounting the indoor unit onto the wall plate.

Outdoor Unit Installation

Selecting Outdoor Unit Location

Criteria for choosing the appropriate location for the outdoor unit.

Anchoring the Outdoor Unit

Steps for anchoring the outdoor unit to the ground or a wall bracket.

Connecting Outdoor Unit Cables

Instructions for connecting signal and power cables to the outdoor unit.

Electrical Work Safety - Power Off

Critical safety warning to disconnect power before electrical work.

Wiring Diagram Compliance

Warning to follow the wiring diagram precisely.

Refrigerant Piping Connection

Cutting Refrigerant Pipes

Instructions for properly cutting refrigerant pipes to the correct length and angle.

Flaring Pipe Ends

Detailed steps for flaring pipe ends to ensure an airtight seal.

Connecting Refrigerant Pipes

Instructions for connecting the refrigerant pipes to the units.

Air Evacuation Process

Evacuation Preparations and Precautions

Important preparations and safety precautions before air evacuation.

Air Evacuation Instructions

Step-by-step guide for performing air evacuation using a vacuum pump.

Adding Refrigerant

Electrical and Gas Leak Checks

Electric Shock Risk Warning

Critical safety warning about electrical shock hazards.

Gas Leak Detection Methods

Methods for checking the refrigerant circuit for leaks.

Unit Test Run Procedure

Test Run Instructions

Steps to follow for conducting the unit's test run.

Related product manuals