8
The IP DECT telephone IP64 is suitable for use in office
environments. It can be operated on the innovaphone
PBX as an extension line on its own or on the same
extension number in addition to a desk top phone. The
DECT connection enables the subscriber to move more
than 100m away from the base station.
Register
Please contact your administrator or local innovaphone
partner in order to register the IP64 DECT telephone to
the base station and the telephone system.
innovaphone PBX features
The IP64 is intuitive to use on the basis of the above
mentioned keys and symbols.
Additional features described here are available for use
on the innovaphone PBX.
Switching between calls
As soon as a call has been set-up, the right-and soft key
takes on the function of the R key. Pressing this key puts
the current call on hold and a second call can be set up.
When both calls have been set up, press the R key and
the number 2 on the numeric pad to switch between calls
and thus to change which call is active.
Conference call
In order to set up a conference call, two calls need to be
set-up first - just like when switching between calls.
Connect the conference calls by pressing the key
combination "R" key (soft key) and the number three key.
End the conference call by pressing the same keys. It is
possible to end each call individually.
To Next Page
Loading...