Need help?Do you have a question about the Innovative Technology PureLab HE Glovebox and is the answer not in the manual?
Required gas, electrical, and exhaust specifications before system installation.
Details on working gas requirements, connections, and cylinder quantity.
Specifies regeneration gas type and composition for factory regeneration.
Steps for pressure testing the system after assembly to ensure leak tightness.
Guide to adjusting the minimum and maximum working pressure settings for the Glovebox.
Procedure for displacing air with inert gas to reduce O2 and H2O levels.
Explanation of blower function and how to control atmosphere circulation through the purifier.
Overview of the main screen, displaying key Glovebox operating parameters.
Initiating and monitoring the regeneration process for the purification column.
Procedure for initiating and monitoring the solvent regeneration process.
Controls for managing blower speed, mode, and restart functions.
Settings for automatic purge based on O2 levels or timed duration.
Manual and automatic operation of the antechamber for transferring items.
Procedure for adjusting the minimum and maximum pressure set points for the Glovebox.
Procedures for operating the Antechambers for item transfer.
Step-by-step guide for manual operation of the large antechamber.
Procedures for operating the mini antechamber for item transfer.
Operation of the automatic antechamber for sequential evacuate/refill cycles.
Operation of automatic purge valves controlled by O2 levels or timed duration.
Initiating and monitoring the regeneration process for the purification column.
Detailed procedure for regenerating a single purification column.
Procedure for regenerating one column while the other remains active.
Procedure for regenerating the solvent removal system's material.
Operation of systems with single purifier controlling two Glovebox modules.
Information on solvent removal systems that absorb solvent vapors.
Description of large capacity solvent removal systems and their isolation valves.
Operation and regeneration of large capacity solvent removal systems.
Inspections: wiring, windows, safe placement of items.
Troubleshooting steps for no working gas flow: checking tank, regulator, and pressure.
Troubleshooting steps for no regeneration gas flow: checking valves and flow meter.
Troubleshooting steps for antechamber vacuum loss: checking doors, valves, and fittings.
Troubleshooting steps for box leaks: focusing on gloves and antechamber integrity.
Troubleshooting steps for vacuum pump issues: checking oil and fittings.
General| Brand | Innovative Technology |
|---|---|
| Model | PureLab HE Glovebox |
| Category | Industrial Equipment |
| Language | English |
To Next Page