Need help?Do you have a question about the innovita Primo 6 and is the answer not in the manual?
Provides detailed technical specifications and data for the water heater models.
Details essential regulations and standards for gas device installation.
Provides guidelines for securely mounting the water heater on a wall.
Specifies requirements for adequate ventilation in the installation area.
Instructions for connecting the water heater to the gas supply safely.
Details on how to connect the water heater to the water supply correctly.
Explains requirements for the safe output and installation of flue gases.
Explains the basic function and control layout of the water heater.
Step-by-step guide on how to start, operate, and switch off the appliance.
Procedure for safely removing the outer casing to access internal components.
Lists common problems, their causes, and recommended solutions for the water heater.
Procedure for engineers to start up the appliance and perform final checks.
General| Heat Output | 6 kW |
|---|---|
| Flue Type | Balanced Flue |
| Gas Type | Natural Gas |
| Ignition | Piezo ignition |
| Safety Features | Oxygen depletion sensor (ODS), Flame failure device |
| Thermostat | Built-in thermostat |
To Next Page
