Innovo CMS 50F PLUS - Page 32

Innovo® CMS 50F PLUS User Manual
27
Appendix 2
Guidance and manufacture's declaration
– electromagnetic emissions for all EQUIPMENT and
SYSTEMS
Guidance and manufacture’s declaration –
electromagnetic emission
The CMS50F PLUS Pulse Oximeter is intended for use in
the electromagnetic environment specified below. The
user should assure that it is used in such environment.
Emission
test
Compliance
Electromagnetic
environment – guidance
RF
emissions
CISPR 11
Group 1
The CMS50F PLUS Pulse
Oximeter uses RF energy
only for its internal
function. Therefore, its
RF emissions are very
low and are not likely to
cause any interference in
nearby electronic
equipment.
RF
emission
CISPR 11
Class B
The CMS50F PLUS
Pulse Oximeter is suitable
for use in all
establishments, including
domestic establishments
and those directly
connected to the public
low-voltage power supply
network that supplies
buildings used for
Harmonic
emissions
IEC
61000-3-2
Not
applicable
Voltage
fluctuations
flicker
Not
applicable