Innovo® CMS 50F PLUS User Manual
1 Safety
1.1 Safety Information
a)
Check the main unit and all accessories periodically to make
sure that there is no visible damage that may affect patient’s
safety and/or monitoring performance of the device. The device
should be inspected at least once a week. Stop using the device if
physical damage is observed.
b)
Maintenance must be performed by qualified service engineers
ONLY. Users should not to maintain the device by themselves.
A.
The oximeter should only be used with devices and/or
accessories specified in this User’s Manual.
B.
This product is calibrated before leaving factory.
1.2 Warning
Explosive hazard—DO NOT use the oximeter in environment
with inflammable gas such as ignitable anesthetic agents.
DO NOT use the oximeter while the user is undergoing MRI or
CT scan.
Do not remove the wristband while using the oximeter. Users
who are allergic to the wristband should not use the pulse
oximeter.
The person who is allergic to rubber cannot use this device.
The disposal of the device, accessories and packing material
(including but not limited to battery, plastic bags, foams and paper
boxes) should follow local laws and regulations.
Please check that all the device and accessories listed in the
packing list are accounted for before use.
Please make sure that the accessories you use with the
oximeter are approved by the manufacturer. Unapproved
accessories may cause irreversible damage to the device.
Please make sure that the battery chargers are in compliance
To Next Page
Loading...
