20
THROTTLE OPERATION
SPEED MODE
When power on
the default display is mode (appear at top right).
You may change it using the buttons.
Speed mode: this function is to limit the maximum
speed of the scooter, either for a beginner user or
for more accurate riding in a crowded surrounding:
• speed mode 3 - using full throttle will gain maximum
speed of the scooter, 25KM/H at default.
• speed mode 2 - using full throttle, will gain 70% of scooter top speed.
• speed mode 1 - using full throttle, the maximum speed will be under10 KM/H
• LCD BACKLIGHT (rst mode)
When power is on, you can open or close the LCD backlight by long press
There are 3 levels for different LCD brightness.
Press to change level from 1 to 3 (low/middle/high).
Long touch to save settings.
Short touch to enter second mode.
• SPEED LIMIT MODE (second mode)
Default and highest speed 25KM/H at full throttle.
You can dene other speed limits (from 6KM/H to 30KM/H).
Press or buttons to change speed limit number.
Long touch to save setting.
Short touch to enter third mode.
DISPLAY MODES
To enter the display modes setings :
Touch buttons for 2 seconds will enter in the rst mode.
Press to switch between modes
Long press will back to normal function menu.
SPEED
To Next Page
Loading...
