Do you have a question about the Inomak CAS170 and is the answer not in the manual?
Procedure to unlock and change temperature settings via the thermostat.
Details on scheduled defrost cycles and manual initiation.
Describes sensor failure, compressor behavior, and need for technical help.
Always disconnect power before starting maintenance.
Suggests qualified technician service after the first year.
Step-by-step guide to remove the temperature sensor cover.
Procedure to unlock the thermostat using sequence button presses.
How to enter the menu, view the first parameter, and scroll through options.
How to change a parameter's value using the SET button.
How to start a manual defrost by holding the key.
Identifies codes for sensor failure, locked thermostat, and door alarms.
Description of flashing alarms for temperature deviations.
Procedure for inputting parameters by pressing multiple buttons.
Detailed diagram showing connections for probes, switches, compressor, and fans.
Addresses problems like lack of cooling, ice build-up, and water leakage.