Need help?Do you have a question about the Inomak MDV711 and is the answer not in the manual?
General| Brand | Inomak |
|---|---|
| Model | MDV711 |
| Category | Commercial Food Equipment |
| Language | English |
Press SET to view the current temperature setting on the display.
Use the arrow buttons to adjust the desired temperature value.
Press SET again to save the adjusted temperature setting.
LF1 indicates a temperature sensor failure, requiring technical assistance.
A memory fault requires re-entering thermostat parameters.
Always disconnect the power supply before cleaning the appliance.
Avoid using sharp or pointed objects that could damage the appliance.
Do not use chlorine or acid-based detergents to prevent stainless steel corrosion.
Never clean the appliance using direct or pressurized water jets.
Periodically clean the heating resistance with anti-calc powder to maintain efficiency.
Always disconnect the appliance from the electrical supply before performing maintenance.
For issues or non-serviceable parts, contact a qualified technician.
To Next Page
